Grinding and polishing are key steps in the preparation of a metallographic sample. It is the quality of these steps which will condition and optimise the rest of the process.

At the end of the grinding step, the sample’s aspect must be uniform and regular without altering the inherent flatness and the material.

The CAMEO^®DISK’s performances in terms of stock removal reduce the work time on the part, thereby guaranteeing the sample’s inherent flatness, an indispensable condition to succeed with your metallographic analyse.

A patented honeycomb cell structure

Stock removal

The CAMEO^®DISK honeycomb cell structure allows decreasing the surface in contact with the sample to be polished. The pressure required to grind the sample is much less than that generally applied during the use of a solid disc. The equipment is less stressed and the risks of tearing out the grinding disc are significantly reduced.

Reproducibility

The profile of the honeycomb cells was specially designed to optimise the circulation of the lubricant from one cavity to another.

The abrasion residues are evacuated, guaranteeing a constant abrasive power and therefore a regularity of the result throughout the grinding and polishing steps.

Preparation quality

For a process usually performed with several SiC abrasive papers, LAM PLAN proposes you a single, reusable disc: the CAMEO^®DISK. Contrary to SiC abrasive papers, CAMEO^®DISK constant abrasion prevents the formation of deep disturbed layers during the first few seconds of grinding.